Maytag Washer How To Clean

Cleaning your Maytag washer is a necessary task to keep it running smoothly and avoiding costly repairs. You can clean your washer with some simple household supplies.

1. Unplug your washer and empty it of any water.

2. Remove the front panel of your washer. There are usually screws or tabs that hold it in place.

3. Take a look inside your washer. You will see a large, round filter in the center. This is the filter that needs to be cleaned.

4. Remove the filter and rinse it under running water.

5. Clean the filter with a brush or a toothbrush.

6. Replace the filter and reattach the front panel of your washer.

7. Plug in your washer and run a cycle with hot water and detergent.

Gather the Necessary Cleaning Supplies

Maytag washers are one of the most reliable on the market. However, to ensure your washer continues to run smoothly and lasts for many years, it’s important to clean it regularly. In this article, we will provide you with the necessary cleaning supplies and show you how to clean your Maytag washer.

To clean your Maytag washer, you will need:

– Bucket
– Vinegar
– Hot water
– Dishwashing liquid
– Sponge
– Toothbrush
– Soft cloth
– Rubber gloves

The first step is to fill the bucket with hot water and add a few drops of dishwashing liquid. Next, put on your gloves and dip the sponge into the soapy water. Wipe down the entire exterior of the washer, making sure to get into all the nooks and crannies.

Next, fill the bucket with vinegar and hot water. Dip the toothbrush into the vinegar and water mixture and scrub the inside of the washer. Be sure to get into all the corners and crevices. Finally, use the soft cloth to wipe down the exterior of the washer.

Clean the Exterior of the Maytag Washer

The exterior of the Maytag washer can be cleaned with a mild detergent and water. First, wet the surface of the washer and apply a small amount of detergent to a clean cloth. Rub the cloth in a circular motion to clean the surface. Rinse the surface with clean water and dry with a clean cloth.

Clean the Dispenser and Detergent Tray

The dispenser and detergent tray on your Maytag washer can become dirty over time. This can cause your washer to not function properly. Here is how to clean the dispenser and detergent tray on your Maytag washer.

1. Unplug your washer.

2. Remove the dispenser by unscrewing the two screws on the top of the dispenser.

3. Remove the detergent tray by pulling it out.

4. Clean the dispenser and detergent tray with a mild detergent and water.

5. Reattach the dispenser and detergent tray.

6. Plug in your washer.

Remove and Clean the Lint Filter

The lint filter on a Maytag washer is located on the front of the washer, just above the door. It is a small, rectangular panel with a hole in the center. The filter is used to trap lint and other debris from the wash water. Over time, the filter can become clogged with lint and other debris, which can affect the performance of the washer.

To clean the lint filter, start by removing it from the washer. There is a small tab on one end of the filter that you can use to pry it loose. Once the filter is loose, you can remove it from the washer.

Once the filter is removed, you can clean it with a brush or a vacuum cleaner. Be sure to remove all of the lint and other debris from the filter. Once the filter is clean, you can reattach it to the washer and resume using it.

Run a Cleaning Cycle

The Maytag washer is a durable appliance that can last for many years with the proper care. One way to ensure your Maytag washer continues to run properly is to clean it on a regular basis. This guide will show you how to run a cleaning cycle on your Maytag washer.

To clean your Maytag washer, you will need to:

1. Unplug the washer.

2. Turn off the water supply to the washer.

3. Remove the hoses from the washer.

4. Open the washer door.

5. Push the washer back to clear the access to the washer drain.

6. Remove the drain plug and allow the water to drain from the washer.

7. Replace the drain plug.

8. Plug in the washer.

9. Turn on the water supply to the washer.

10. Select the cleaning cycle on the washer.

11. Press the start button to start the cleaning cycle.

12. Allow the washer to complete the cleaning cycle.

13. Remove the clothes from the washer.

14. Inspect the washer for any areas that need to be cleaned.

15. Repeat the steps as necessary to clean the washer.

Wipe Down the Interior Drum

Maytag washers are some of the best on the market. They are known for their durability and long life. However, even the best machines need some occasional TLC. One of the most important things you can do to keep your Maytag washer running like new is to clean it regularly.

The first step is to wipe down the interior drum. This can be done with a damp cloth. Be sure to remove any dirt or debris that may have collected inside. If the drum is particularly dirty, you may need to use a mild detergent or a degreasing agent.

The next step is to clean the gasket. This is the seal that surrounds the door. Gaskets can become dirty over time, and this can cause water to leak. To clean it, use a soft brush and a mild detergent. Be sure to rinse it thoroughly.

Finally, clean the door seal. This can be done using a vacuum cleaner or a soft brush. Be sure to remove any dirt or debris that may have collected there.

By following these simple steps, you can keep your Maytag washer running like new for years to come.

Clean the Door Seal and Gasket

Maytag washers are a popular choice for many homeowners, and they offer a wide range of features and options. One of the most important features of any washer is the seal that keeps water and dirt from getting inside the unit. Over time, this seal can become dirty and need to be cleaned. The following instructions will show you how to clean the seal on your Maytag washer.

1. Unplug your washer and move it away from the wall.

2. Locate the seal on the door of the washer.

3. Use a damp cloth to clean the seal.

4. Be sure to clean the entire seal, including the edges.

5. Dry the seal with a clean cloth.

6. Plug in your washer and move it back into place.

The seal on your Maytag washer should now be clean and free of dirt and debris.

Maintain Regular Cleaning Routine

Maytag washers are some of the most reliable machines on the market, but like all appliances, they need to be cleaned and maintained on a regular basis. If your washer isn’t getting the job done, or you’re having trouble with it, a clean and well-maintained machine may be the answer.

The first step in cleaning your washer is to unplug it and remove the water supply hoses. If your washer has a filter, remove it and clean it as well. Next, use a vacuum cleaner to clean the inside of the washer. Be sure to get into all the nooks and crannies. Finally, use a damp cloth to wipe down the outside of the washer.

To maintain your washer’s cleanliness, it’s important to perform a regular cleaning routine. The best time to do this is when you’re doing a load of laundry anyway. Here’s what you need to do:

-Remove any lint or debris from the lint filter.
-Check the hoses for any kinks or leaks.
-Remove the water supply hoses and clean them with a brush.
-Vacuum the inside of the washer, including the agitator.
-Wipe down the exterior of the washer.

Performing a regular cleaning routine will help keep your washer running smoothly and prevent any build-up of dirt and grime.

Author

  • Amelia Jones

    Born and raised in a small town in upstate NY, Amelia has always been a creative person. After moving to the city in her early twenties, she discovered a love for organizing and helping others create a home they love. Amelia currently lives in Brooklyn with her husband and young son, and blogs about her home tips and tricks.

Related Posts