How To Clean Silicone Dab Rig

Reading Time: 6 minutes

A silicone dab rig is a type of water pipe that is made from silicone. It is a newer type of water pipe that is becoming more popular because it is easier to clean than other types of water pipes.

To clean a silicone dab rig, you will need to gather some supplies. These supplies include hot water, dish soap, a toothbrush, and a rag.

The first step is to pour hot water into the dab rig and add a few drops of dish soap. Swish the water around to create suds.

Then, use a toothbrush to scrub the inside of the rig. Be sure to get into all the nooks and crannies.

Finally, rinse the rig with hot water and wipe it down with a rag.

Your silicone dab rig is now clean and ready to use!

Understanding the Components of a Silicone Dab Rig

Silicone dab rigs are a relatively new addition to the cannabis market, and there is still some confusion about how to clean them and what their components are. This article will walk you through the process of cleaning a silicone dab rig and explain the different parts that make it up.

The first thing you need to do is gather the necessary supplies. These include isopropyl alcohol, salt, a small bowl, and a pipe cleaner.

The next step is to disassemble the dab rig. This will vary depending on the design of your rig, but typically, you will need to remove the base, the downstem, and the bowl.

Once the pieces are all apart, you can begin cleaning them. Pour the isopropyl alcohol into the small bowl and add enough salt to create a scrubbing solution. Soak the pieces in the solution for a few minutes, then use the pipe cleaner to scrub away any built-up resin. Rinse the pieces with warm water and allow them to dry completely before reassembling the rig.

Gathering the Necessary Cleaning Supplies

When it comes time to clean your silicone dab rig, you’ll need to gather some supplies first. This includes 91% or higher isopropyl alcohol, a small brush, Q-tips, and a glass or plastic container.

To begin, you’ll want to pour the isopropyl alcohol into the container. Next, insert the brush and Q-tips into the alcohol and allow them to soak.

Now, it’s time to clean the dab rig. Start by brushing off any large chunks or residue. Then, use the Q-tips to clean in the crevices and any other small areas.

Finally, allow the dab rig to air dry. Make sure that it is completely dry before using it again.

Emptying and Disposing of Residual Dabbing Substances

When it comes to dabbing, there are a few essential steps to follow in order to ensure a safe and enjoyable experience. One of these is making sure to clean your dab rig after each use. This article will teach you how to empty and dispose of residual dabbing substances from your dab rig.

Materials you will need:

-Rubber gloves
-Isopropyl alcohol
-Paper towels
-Stainless steel spoon
-Baking soda


1. Start by putting on your rubber gloves. This will protect your hands from any harmful chemicals or residue.

2. Next, pour some isopropyl alcohol into the cup.

3. Swish the alcohol around the dab rig, making sure to get into all the nooks and crannies.

4. Use a Q-tip to scrub off any stubborn residue.

5. Rinse the dab rig with water.

6. Pour the baking soda into the rig and shake it around. This will help to neutralize any remaining residue.

7. Rinse the rig with water once more.

8. Wipe down the dab rig with a paper towel to remove any remaining moisture.

9. Store the dab rig in a safe place until your next use.

Emptying and disposing of residual dabbing substances can be a bit of a hassle, but it’s essential for keeping your dab rig clean and safe. By following the steps outlined in this article, you can make sure that your dab rig is ready for your next session.

Dismantling the Silicone Dab Rig

If you want to clean your silicone dab rig, the first thing you need to do is to dismantle it. This will allow you to get to all the nooks and crannies where the dirt and resin can accumulate.

The first step is to remove the downstem and the bowl. To do this, gently twist them in opposite directions.

Next, remove the top of the rig by pulling it off.

Now, you can get to the inside of the rig. Use a q-tip or a pipe cleaner to clean the resin from the tubing. You can also use a toothbrush to get into the crevices.

Be sure to rinse the rig thoroughly with warm water after cleaning.

Reassembly is the reverse of disassembly. Be sure to tighten all the parts securely to avoid leaks.

Cleaning the Components with Isopropyl Alcohol

Dab rigs are a great way to enjoy concentrates, but they can be a little tricky to clean. If you don’t clean them regularly, residue can build up and make it difficult to get a good hit. In this article, we’ll show you how to clean a silicone dab rig using isopropyl alcohol.

The first step is to disassemble the dab rig. This will allow you to clean all of the individual components. Make sure to safekeep all of the screws, washers, and other small pieces, as you will need them later.

Next, soak the components in isopropyl alcohol. You can either do this in a container or in the sink. Make sure to soak all of the pieces, including the downstem, the bowl, and the silicone body.

Let the components soak for at least 30 minutes. This will allow the isopropyl alcohol to loosen any built-up residue.

After 30 minutes, scrub the components with a toothbrush. This will help remove any stubborn residue.

Rinse the components with warm water.

Finally, reassemble the dab rig and enjoy your clean rig!

Scrubbing and Rinsing the Silicone Dab Rig

Silicone dab rigs are a popular choice for those looking for an easy-to-clean dabbing experience. Unlike traditional glass dab rigs, silicone dab rigs can be easily scrubbed and rinsed with water to remove any residue or build-up.

To clean a silicone dab rig, start by filling a bowl or sink with warm water and adding a few drops of dish soap. Scrub the dab rig with a soft brush to remove any built-up residue. Rinse the dab rig with warm water, making sure to get all the soap off. Let the dab rig air dry.

It’s also a good idea to clean the dab rig after every use. This will help prevent any build-up and make cleaning the dab rig much easier.

Drying and Reassembling the Dab Rig

A silicone dab rig can be a great investment for any cannabis lover. Not only are they incredibly easy to clean, but they are also heat resistant and can be used with any type of concentrate. Here is a simple guide on how to clean and dry your silicone dab rig, as well as how to reassemble it.

Cleaning the Rig

The first step in cleaning your silicone dab rig is to remove the nail and the downstem. You can do this by unscrewing them or by pulling them out if they are attached. Once they are removed, you can use a q-tip or a toothbrush to clean the inside of the rig. Be sure to get all of the resin and buildup off of the sides and the bottom.

Once the inside is clean, you can use a hot water bath to clean the outside of the rig. Be sure to avoid getting the hot water inside of the rig. You can do this by holding the rig under running water or by submerging it in a bath of hot water.

Once the rig is clean, you can dry it off with a towel or by shaking it off. Be sure to avoid getting any water inside of the rig.

Reassembling the Rig

The next step is to reassemble the rig. This is done by screwing the nail and the downstem back into the rig. Once they are in place, you can test the rig to make sure that it is working properly.

If everything is in working order, you can then enjoy your clean and fresh silicone dab rig.

Maintaining Regular Cleaning and Care for the Silicone Dab Rig

Silicone dab rigs are a relatively new innovation in the world of cannabis concentrate consumption. They are made from silicone, a non-toxic, heat-resistant material, and have the advantage of being much easier to clean than traditional glass dab rigs.

Despite their apparent simplicity, there are a few things you need to know in order to clean and maintain your silicone dab rig properly.

Cleaning the Dab Rig

The first step is to remove any build-up from the rig. This can be done by using a soft bristled brush and a bit of isopropyl alcohol (91% or higher). Be sure to avoid getting alcohol into the rig’s mouthpiece.

Next, use hot water to rinse the rig clean. Be sure to use lukewarm water, as hot water can damage the silicone.

Finally, use a soft cloth to dry the rig.

Cleaning the Rig’s Accessories

The dabber, nails, and other accessories can be cleaned in the same way as the dab rig. However, be careful not to damage the nails by using too much force when cleaning them.


If you’re not using your silicone dab rig, it’s best to store it in a dry place. Silicone can absorb moisture, so it’s important to keep it dry to prevent mould from growing.


  • Amelia Jones

    Born and raised in a small town in upstate NY, Amelia has always been a creative person. After moving to the city in her early twenties, she discovered a love for organizing and helping others create a home they love. Amelia currently lives in Brooklyn with her husband and young son, and blogs about her home tips and tricks.

Related Posts