Assembling your own AR-15 rifle from a kit can be a fun and rewarding experience. There are a number of kits available on the market, ranging from simple to complete. In this article, we’ll take a look at what’s involved in putting together a DIY AR-15 kit, as well as some things to keep in mind when making your purchase.
The first thing you’ll need to do is decide what kind of kit you want. There are two basic types: the lower receiver kit and the upper receiver kit. The lower receiver kit contains all the parts needed to assemble the lower receiver, which is the main body of the rifle. The upper receiver kit contains all the parts needed to assemble the upper receiver, which includes the barrel, sights, and other components.
If you’re just starting out, it’s probably a good idea to go with a lower receiver kit. These kits are usually less expensive and easier to assemble. Once you have the lower receiver assembled, you can then purchase an upper receiver kit and complete the rifle.
When choosing a kit, you’ll also need to decide what kind of caliber you want your AR-15 to be. The most popular calibers are the .223 Remington and the 5.56 NATO. There are also kits available in .308 Winchester and 7.62x39mm.
Once you’ve decided on a kit and caliber, the next step is to choose a barrel. There are a number of different barrels available, from short barrels to long barrels. The type of barrel you choose will depend on how you plan to use your AR-15. For example, if you’re planning on using it for hunting, you’ll probably want a longer barrel so you can have more accuracy. If you’re just plinking around at the range, a shorter barrel will do just fine.
Once you have your barrel, the next step is to choose a stock. There are a number of different stocks available, from collapsible stocks to fixed stocks. The type of stock you choose will depend on your personal preference and how you plan to use your AR-15.
After you have your barrel and stock, the next step is to choose a handguard. There are a number of different handguards available, from free-float handguards to drop-in handguards. The type of handguard you choose will depend on your personal preference and how you plan to use your AR-15.
The last step in choosing a kit is to choose a trigger. There are a number of different triggers available, from single-stage triggers to two-stage triggers. The type of trigger you choose will depend on your personal preference and how you plan to use your AR-15.
Once you have all your parts, the next step is to assemble your AR-15. This can be done by following the instructions that come with your kit, or by watching a video tutorial.
Assembling your own AR-15 can be a fun and rewarding experience. It’s a great way to learn about the inner workings of the rifle, and it can also save you a lot of money. With a little patience and attention to detail, you can easily put together a high-quality AR-15 that will serve you well for many years to come.
Understanding the Benefits of DIY AR-15 Kits
If you’re looking to build your own AR15, one of the first decisions you’ll need to make is whether to buy a kit or not. There are benefits and drawbacks to both approaches, and the best option for you will ultimately depend on your own individual needs and preferences. In this article, we’ll take a closer look at the benefits of DIY AR15 kits so that you can make a more informed decision about which route to take.
One of the main benefits of choosing a DIY AR15 kit is that it can save you a significant amount of money. If you’re able to source all of the components yourself, you can potentially build an AR15 for half the cost of buying one outright. This is a great option for budget-conscious shooters who still want a high-quality rifle.
Another benefit of choosing a DIY kit is that it allows you to customize your rifle to your exact specifications. When you buy an AR15 off the shelf, you’re generally stuck with whatever configuration the manufacturer offers. With a DIY kit, on the other hand, you can choose the exact components you want and build a rifle that perfectly suits your needs.
Of course, there are also a few potential drawbacks to building your own AR15. One is that it can take a significant amount of time and effort to assemble everything correctly. If you’re not comfortable working with tools or don’t have much experience with firearms, it’s probably not the best option for you. Additionally, because you’re sourcing all of the components yourself, it can be difficult to ensure that everything fits together properly and works as it should.
Overall, there are both benefits and drawbacks to choosing a DIY AR15 kit. It’s important to carefully consider your own needs and preferences before making a decision. If you’re comfortable working with tools and are confident in your ability to put everything together, a DIY kit can be a great way to save money and get exactly the rifle you want. However, if you’re not sure you’re up for the task or don’t want to risk ending up with a faulty rifle, it’s probably best to stick with a ready-made model.
Selecting the Right Components for Your AR-15 Build
DIY AR 15 Kits: Selecting the Right Components for Your AR15 Build
With so many options on the market, it can be a daunting task to select the right components for your AR15 build. However, by taking the time to research each component and its purpose, you can ensure that your build will be just as you imagined.
In this article, we’ll cover the basics of selecting each component for your AR15 build, including the upper and lower receiver, barrel, handguard, stock, and more. By the end, you’ll have a better understanding of which components are right for your build.
Let’s get started!
The first step is to select the upper and lower receiver. The upper receiver is the portion of the AR15 that houses the barrel, bolt carrier group, and charging handle. The lower receiver is the portion of the AR15 that houses the trigger assembly and magazine well.
There are two main types of receivers on the market: forged and billet. Forged receivers are made from a single piece of metal that is pounded into shape. Billet receivers are made from two pieces of metal that are machined to fit together.
Forged receivers are generally considered to be stronger than billet receivers. However, billet receivers offer more design options and can be lighter in weight.
The next step is to select the barrel. The barrel is the portion of the AR15 that the bullet travels through. There are several factors to consider when selecting a barrel, including length, twist rate, and material.
Barrel length is measured from the muzzle to the end of the barrel (excluding the muzzle device). The most common lengths are 16 inches, 18 inches, and 20 inches.
The twist rate is the number of inches that the bullet will travel in one complete revolution. The most common twist rates are 1:7, 1:8, and 1:9.
The material of the barrel is also important. The most common materials are stainless steel and chrome-molybdenum. Stainless steel barrels are more resistant to corrosion, but chrome-molybdenum barrels are generally more accurate.
The next step is to select the handguard. The handguard is the portion of the AR15 that covers the barrel and protects the shooter’s hand from being burned by the hot barrel.
There are many different types of handguards on the market, including free-floating, drop-in, and quad-rail handguards. Free-floating handguards do not touch the barrel, which allows the barrel to cool more quickly and eliminates the risk of the handguard affecting the accuracy of the shot. Drop-in handguards are the most common type and are easy to install. Quad-rail handguards provide a Picatinny rail on all four sides of the handguard, which allows for the attachment of a wide variety of accessories, such as lights, lasers, and grips.
The next step is to select the stock. The stock is the portion of the AR15 that the shooter rests against their shoulder. There are several different types of stocks on the market, including fixed, collapsible, and adjustable stocks.
Fixed stocks are the most common type of stock and cannot be adjusted. Collapsible stocks can be adjusted to different lengths, which is perfect for shooters of different heights. Adjustable stocks can be adjusted for both length and cheek weld.
The next step is to select the bolt carrier group. The bolt carrier group is the portion of the AR15 that contains the bolt and the carrier. The bolt carrier group is responsible for chambering, firing, and extracting the round.
There are two main types of bolt carrier groups on the market: full-auto and semi-auto. Full-auto bolt carrier groups are typically used by law enforcement and military personnel. Semi-auto bolt carrier groups are typically used by civilians.
The next step is to select the trigger assembly. The trigger assembly is the portion of the AR15 that contains the trigger, trigger guard, and magazine release.
There are many different types of trigger assemblies on the market, including single-stage and two-stage triggers. Single-stage triggers are the most common type and are easy to use. Two-stage triggers are typically used by competition shooters and are more difficult to use.
The next step is to select the magazine. The magazine is the portion of the AR15 that holds the ammunition. There are many different types of magazines on the market, including detachable and flush-fit magazines.
Detachable magazines are the most common type and can be easily removed from the AR15. Flush-fit magazines are less common and cannot be easily removed from the AR15.
The final step is to select the sights. The sights are the portion of the AR15 that the shooter uses to align the shot. There are many different types of sights on the market, including iron sights, red dot sights, and scope sights.
Iron sights are the most common type of sight and are typically used for close-range shots. Red dot sights are typically used for mid-range shots. Scope sights are typically used for long-range shots.
Now that you know the basics of selecting each component for your AR15 build, it’s time to start shopping! Check out our website for a wide selection of AR15 parts and accessories.
Gathering the Necessary Tools for the Project
Building your own AR-15 can be a rewarding and challenging experience. It can also be a great way to save money, as pre-built rifles can be quite expensive. But before you can start your build, you need to gather the necessary tools. Here’s a quick rundown of what you’ll need:
1. A drill. This is perhaps the most important tool you’ll need, as it’s used for drilling out the receiver for the barrel and various other holes.
2. A set of drill bits. You’ll need these to match the size of the holes you’re drilling.
3. A jig. This is used to help ensure that the holes you’re drilling are in the correct location.
4. A set of taps and dies. These are used to cut threads into the receiver and barrel, respectively.
5. A set of files. You’ll need these to smooth out any rough edges on the receiver and barrel.
6. A set of wrenches. These are used to tighten and loosen screws, as well as to remove the gas tube from the barrel.
7. A set of crescent wrenches. These are used to tighten and loosen the set screws on the gas block.
8. A set of pliers. These are used to remove the firing pin from the bolt carrier.
9. A set of saws. You’ll need these to cut the handguard and gas block to size.
10. A set of calipers. These are used to measure the diameter of the barrel and receiver.
11. A set of measuring devices. You’ll need these to measure the length of the barrel and receiver.
12. A set of hammers. These are used to install the barrel and receiver into the jig.
13. A set of chisels. These are used to remove the material from the inside of the receiver.
14. A set of punches. These are used to remove the material from the inside of the barrel.
15. A set of reamers. These are used to enlarge the holes in the receiver and barrel.
16. A set of lathes. These are used to cut the threads on the barrel and receiver.
17. A set of presses. These are used to install the barrel and receiver into the jig.
18. A set of dies. These are used to cut the threads on the muzzle brake.
19. A set ofForge. This is used to heat the receiver and barrel for installation.
20. A set of anvils. These are used to support the receiver and barrel during installation.
21. A set of hammers. These are used to strike the anvils and complete the installation.
22. A set of saws. These are used to cut the handguard and gas block to size.
23. A set of calipers. These are used to measure the diameter of the barrel and receiver.
24. A set of measuring devices. You’ll need these to measure the length of the barrel and receiver.
25. A set of wrenches. These are used to tighten and loosen screws, as well as to remove the gas tube from the barrel.
26. A set of crescent wrenches. These are used to tighten and loosen the set screws on the gas block.
27. A set of pliers. These are used to remove the firing pin from the bolt carrier.
28. A set of taps and dies. These are used to cut threads into the receiver and barrel, respectively.
29. A set of files. You’ll need these to smooth out any rough edges on the receiver and barrel.
30. A set of sandpaper. You’ll need this to finish the receiver and barrel.
With these tools, you should be able to complete your AR-15 build with no problem. Just be sure to take your time and follow the instructions carefully, and you’ll end up with a great rifle that you can be proud of.
Assembling the Lower Receiver of the AR-15
If you’re a do-it-yourselfer, you may be considering assembling your own AR15 lower receiver. While it’s not a difficult task, there are a few things you should know before you get started. In this article, we’ll walk you through the process of assembling an AR15 lower receiver, including what tools you’ll need and what to watch out for.
The lower receiver of the AR15 is the part that houses the trigger assembly and magazine well. It’s also the part that is regulated by the ATF, so it’s important to be familiar with the rules and regulations before you start.
The first thing you’ll need to do is gather the tools you’ll need. You’ll need a drill, a hand drill, or a drill press. You’ll also need a set of drill bits, a set of taps, and a set of dies. Additionally, you’ll need a set of files, a set of wrenches, and a set of pliers.
Once you have your tools gathered, you’ll need to familiarize yourself with the lower receiver. The best way to do this is to take it apart and then put it back together a few times. This will help you to understand how the parts fit together and how they work.
When you’re ready to start drilling, you’ll need to start with the trigger pin hole. This is the hole that the trigger assembly will fit into. You’ll need to drill this hole to the proper size, which is usually 1/8″. Next, you’ll need to drill the two holes for the set screws that hold the trigger assembly in place. These holes are usually located on the side of the lower receiver near the front.
After the trigger pin hole and set screw holes are drilled, you’ll need to tap them. Tapping the holes creates threads that the set screws can screw into. To tap the holes, you’ll need to use a tap handle and a tap. The tap handle is simply a T-shaped handle that you insert the tap into. The tap cuts the threads into the holes.
Once the holes are tapped, you can install the set screws. Be sure to use thread locker on the set screws to keep them from coming loose.
Next, you’ll need to install the trigger assembly. To do this, you’ll first need to install the trigger return spring. The trigger return spring goes over the trigger assembly and fits into a groove in the lower receiver.
Once the trigger return spring is in place, you can install the trigger assembly. The trigger assembly fits into the trigger pin hole that you drilled earlier. Be sure that the trigger assembly is seated all the way into the hole. You may need to use a punch or a small screwdriver to help seat it.
Once the trigger assembly is seated, you can install the trigger and hammer pins. The trigger pin goes through the trigger assembly and the lower receiver. The hammer pin goes through the hammer and the trigger assembly. Be sure that the pins are installed so that the rounded ends are facing out.
With the trigger and hammer pins installed, you can now install the safety selector. The safety selector goes through the lower receiver and the trigger assembly. It’s important to make sure that the selector is installed so that the “safe” position is towards the rear of the lower receiver.
The last step in assembling the lower receiver is to install the magazine release. The magazine release goes through the lower receiver and fits into a slot in the magazine well. Be sure that the magazine release is installed so that the “release” button is facing towards the rear of the lower receiver.
That’s it! You’ve now assembled the lower receiver of your AR15.
Installing the Upper Receiver and Barrel
Installing an upper receiver and barrel on an AR-15 is a pretty simple process, but there are a few things you need to know before you get started. Here’s a step-by-step guide to help you through the process.
1. Start by attaching the upper receiver to the lower receiver. You’ll need to thread the two together using the provided screws.
2. Once the upper and lower receivers are attached, you can then start attaching the barrel. Begin by threading the barrel into the upper receiver.
3. Next, attach the gas block to the barrel. You’ll need to align the gas block with the gas port on the barrel. Once aligned, you can then secure the gas block in place with the provided set screws.
4. The next step is to install the gas tube. The gas tube will need to be inserted into the gas block and then screwed into the upper receiver.
5. With the gas tube in place, you can then install the handguard. There are a few different ways to do this, but the most common is to first install the front sight base and then thread the handguard onto the barrel.
6. The last step is to install the muzzle device. This can be done by threading it onto the barrel or by attaching it to the gas block.
That’s it! You’ve now successfully installed the upper receiver and barrel on your AR-15.
Adding the Handguard, Stock, and Grip
As anyone who’s ever built an AR-15 knows, one of the most important aspects of the rifle is the handguard. Not only does it protect your hand from getting burned by the hot barrel, but it also provides a place to mount your accessories. Most factory handguards are made from plastic and don’t offer much in the way of customization, but there are a number of aftermarket options available.
If you’re looking to add a little personality to your AR-15, or just want a more solid handguard that can accommodate more accessories, then a DIY kit is a great option. In this article, we’ll show you how to install a handguard, stock, and grip on your AR-15.
The first step is to remove the old handguard. This is usually held on by two screws in the front and two set screws in the rear. Once the screws are removed, the handguard should slide right off.
Next, you’ll need to install the new handguard. Most handguards will come with instructions on how to do this, but the general idea is to slide it on from the front and then tighten the screws in the rear.
Once the handguard is installed, you can move on to the stock and grip. The stock is the part of the rifle that you rest your cheek on, and the grip is the part that you hold onto. Both of these parts are held on by screws, so you’ll need to remove the old ones and install the new ones.
The last step is to install any accessories you want to add to your handguard. This could be a flashlight, laser, or anything else you want to add. Most accessories will come with their own set of instructions, so just follow those and you’ll be all set.
And that’s it! You’ve now installed a handguard, stock, and grip on your AR-15. This is a pretty straightforward process, but if you have any questions, feel free to reach out to us and we’ll be happy to help.
Testing and Function Checking the Completed AR-15
If you’re like me, you’re always looking for ways to save money and do things yourself. That’s why I was excited to find out that there are DIY AR 15 kits available online. I was able to put one together and test it out, and I’m happy to report that it worked great!
Here’s a step-by-step guide to building your own AR 15:
1. Order your kit. I found mine on a popular online retailer.
2. Once you have your kit, it’s time to start assembling. Follow the instructions that come with your kit, and pay close attention to detail.
3. Once your AR 15 is assembled, it’s time to test it out. Make sure all the moving parts are working correctly, and that the trigger feels good.
4. If everything checks out, you’re ready to go! Enjoy your new AR 15 and be proud that you built it yourself.
Cleaning and Maintaining Your DIY AR-15
As any gun owner knows, regular cleaning and maintenance is crucial to the longevity and performance of your firearms. This is especially true for AR15s, which are designed for high-volume shooting. Whether you’re a competitive shooter or just like to plink at the range, keeping your AR in top condition is key to making sure it always performs its best.
There are a few things to keep in mind when cleaning your AR15. First, always make sure the gun is unloaded before beginning any cleaning or maintenance. Second, disassemble the gun into its individual components before cleaning. This will make the process much easier and allow you to thoroughly clean all the parts. Finally, use the proper cleaning supplies and solvents designed specifically for firearms.
Cleaning the Barrel
The barrel is one of the most important parts of the gun to keep clean. A dirty barrel can cause all sorts of problems, from decreased accuracy to increased wear on the gun. To clean the barrel, start by using a bore brush to scrub away any carbon buildup. Be sure to use a brush that’s the proper size for your barrel – using a brush that’s too small can damage the bore.
Once the barrel is brushed clean, run a patch through it to remove any residual debris. Finally, use a bore solvent to remove any tough deposits. Let the solvent soak for a few minutes, then run another patch through the bore to remove it.
Cleaning the Bolt Carrier Group
The bolt carrier group (BCG) is another critical part of the gun that needs to be kept clean. A dirty BCG can cause all sorts of problems, from decreased reliability to increased wear on the gun. To clean the BCG, start by disassembling it into its individual components.
Once the BCG is disassembled, use a brush to scrub away any carbon buildup on the bolt and carrier. Be sure to use a brush that’s the proper size for your BCG – using a brush that’s too small can damage the parts.
Once the bolt and carrier are brushed clean, use a cleaning solvent to remove any tough deposits. Let the solvent soak for a few minutes, then use a brush to scrub away any remaining residue. Finally, use a oil or lubricant to protect the parts from corrosion.
Cleaning the Receiver
The receiver is the part of the gun that houses the trigger assembly, and it’s important to keep it clean to ensure the gun functions properly. To clean the receiver, start by disassembling the trigger assembly. Once the trigger assembly is removed, use a brush to scrub away any dirt or debris from the inside of the receiver.
Once the receiver is brushed clean, use a cleaning solvent to remove any tough deposits. Let the solvent soak for a few minutes, then use a brush to scrub away any remaining residue. Finally, use a oil or lubricant to protect the parts from corrosion.
Cleaning the Rest of the Gun
Once you’ve cleaned the barrel, BCG, and receiver, it’s time to move on to the rest of the gun. Start by cleaning the charging handle and gas tube. Use a brush to remove any dirt or debris, then use a cleaning solvent to remove any tough deposits. Let the solvent soak for a few minutes, then use a brush to scrub away any remaining residue.
Next, move on to the handguard. Use a brush to remove any dirt or debris, then use a cleaning solvent to remove any tough deposits. Let the solvent soak for a few minutes, then use a brush to scrub away any remaining residue.
Finally, clean the stock and grip. Use a brush to remove any dirt or debris, then use a cleaning solvent to remove any tough deposits. Let the solvent soak for a few minutes, then use a brush to scrub away any remaining residue.
Once you’ve cleaned all the parts of the gun, it’s time to reassemble it. Be sure to use the proper lubricants and oils on all the moving parts to ensure smooth operation.
Conclusion
Cleaning and maintaining your AR15 is essential to keeping it in top condition. Be sure to disassemble the gun into its individual parts before cleaning, and use the proper cleaning supplies and solvents. With a little regular care, your AR15 will provide years of reliable service.
